Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/30641

Validation of an RF Image System for Real-Time Tracking Neurosurgical Tools

Título :
Validation of an RF Image System for Real-Time Tracking Neurosurgical Tools
Autor :
Blanco Angulo, Carolina
Martínez Lozano, Andrea  
Juan, Carlos G.
Gutiérrez Mazón, roberto  
Arias, Julia  
Avila Navarro, Ernesto
Sabater-Navarro, Jose Maria  
Editor :
MDPI
Departamento:
Departamentos de la UMH::Ingeniería de Comunicaciones
Fecha de publicación:
2022-05-19
URI :
https://hdl.handle.net/11000/30641
Resumen :
A radio frequency (RF)-based system for surgical navigation is presented. Surgical navigation technologies are widely used nowadays for aiding the surgical team with many interventions. However, the currently available options still pose considerable limitations, such as line-of-sight occlusion prevention or restricted materials and equipment allowance. In this work, we suggest a different approach based on a microwave broadband antenna system. We combine techniques from microwave medical imaging, which can overcome the current limitations in surgical navigation technologies, and we propose methods to develop RF-based systems for real-time tracking neurosurgical tools. The design of the RF system to perform the measurements is shown and discussed, and two methods (Multiply and Sum and Delay Multiply and Sum) for building the medical images are analyzed. From these measurements, a surgical tool’s position tracking system is developed and experimentally assessed in an emulated surgical scenario. The reported results are coherent with other approaches found in the literature, while overcoming their main practical limitations. The discussion of the results discloses some hints on the validity of the system, the optimal configurations depending on the requirements, and the possibilities for future enhancements.
Palabras clave/Materias:
microwave-based medical image
real-time tracking
RF antenna system
surgical navigation
Área de conocimiento :
CDU: Ciencias aplicadas: Ingeniería. Tecnología
Tipo documento :
application/pdf
Derechos de acceso:
info:eu-repo/semantics/openAccess
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
DOI :
https://doi.org/ 10.3390/s22103845
Aparece en las colecciones:
Artículos Ingeniería Comunicaciones



Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.