Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/33441
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorClar Garcia, David-
dc.contributor.authorCampello Vicente , Héctor -
dc.contributor.authorCampillo-Davo, Nuria-
dc.contributor.authorSanchez Lozano, Miguel-
dc.contributor.authorVELASCO SANCHEZ, EMILIO-
dc.contributor.otherDepartamentos de la UMH::Ingeniería Mecánica y Energíaes_ES
dc.date.accessioned2024-10-07T09:14:52Z-
dc.date.available2024-10-07T09:14:52Z-
dc.date.created2024-06-28-
dc.identifier.citationAcoustics 2024, 6(3), 579-592es_ES
dc.identifier.issn2624-599X-
dc.identifier.urihttps://hdl.handle.net/11000/33441-
dc.description.abstractThe primary cause of noise from vehicular traffic while travelling at speeds over 30 km/h is tyre/road interaction. To reduce this noise source, tyre/road sound emissions research has been carried out using different approaches. Most of this research has been centred around track tests, leading to the development of various track and road-based methods for evaluating tyre/road noise emissions. The CPX (Close-Proximity), along with the CPB (Controlled Pass-By), the CB (Coast-By) and the SPB (Statistical Pass-By), methods are the most common ones. Nevertheless, since Reg. (EC) 1222/2009 came into force, only the CB method, defined in Reg. (EC) 117/2007, can be used to obtain tyre/road noise emission type approval values in Europe. However, current track test methods have important limitations, such as the variability of the results depending on the test track or the test vehicle, the repeatability, the influence of environmental variables or, the main aspect, the limitation of the registered magnitude in these tests, which is the sound pressure level. The Alternative Drum test method (A-DR) was developed in 2015 in order to avoid these disadvantages. However, it involves a complex and time-consuming microphone array for each test. With the purpose of improving the A-DR test method, a new methodology based on drum tests, the ISO 11819-2 and the ISO 3744 standards, was developed. This paper describes the new Alternative CPX Drum test method (A-CPX-DR) and validates it by testing several tyres according to the CB, the A-DR and the A-CPX-DR test methods and comparing their results. This research has demonstrated that all three methods have equivalent sound spectra and obtain close equivalent sound pressure levels for type approval of tyres in the EU, while drum tests have shown greater accuracy. For both reasons, the new A-CPX-DR methodology could be used for tyre/road noise emission type approval in a more precise and cheaper wayes_ES
dc.formatapplication/pdfes_ES
dc.format.extent14es_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectAlternativees_ES
dc.subjectDrum methodes_ES
dc.subjectClose Proximity methodes_ES
dc.subjecttyrees_ES
dc.subjectnoisees_ES
dc.subjectdrumes_ES
dc.subjectsound poweres_ES
dc.subject.otherCDU::6 - Ciencias aplicadas::62 - Ingeniería. Tecnologíaes_ES
dc.titleA New CPX Drum Test to Obtain Sound Pressure Levels of Tyre Noise for Type Approvales_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherversionhttps://doi.org/10.3390/acoustics6030031es_ES
Aparece en las colecciones:
Artículos Ingeniería Mecánica y Energía


Vista previa

Ver/Abrir:
 acoustics-06-00031.pdf

7,16 MB
Adobe PDF
Compartir:


Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.