Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/33431

Analysis of the influence of different factors on the rolling resistance of retreated tires: contribution to CO2 emissions


Vista previa

Ver/Abrir:
 RCT_2020-PREPRINT.pdf

1,34 MB
Adobe PDF
Compartir:
Título :
Analysis of the influence of different factors on the rolling resistance of retreated tires: contribution to CO2 emissions
Autor :
Cuadrado Sempere, Óscar  
Sanchez Lozano, Miguel  
Editor :
American Chemical Society
Departamento:
Departamentos de la UMH::Ingeniería Mecánica y Energía
Fecha de publicación:
2020
URI :
https://hdl.handle.net/11000/33431
Resumen :
The reduction of fuel consumption of vehicles is one of the priority objectives in addressing the reduction of CO2. Current EC regulations stipulate minimum requirements for new tires in relation to their low rolling resistance coefficient (RRC) and rolling noise. Nevertheless, these requirements do not apply at present to retreaded tires, which represent today 40% of the consumption of truck and commercial vehicles. The influence of different parameters on the RR obtained after retreading is studied. First, an attempt has been made to eliminate the influence of the condition of the starting casing, studying separately the influence of factors associated with the retread process and the materials used therein. To achieve this goal, RRC tests were carried out on new tires, on the casings of the same tires after being scraped, and finally after being retreaded using different formulations and processes. The results show that retreading significantly increases RRC, but the influence of the casing manufacturer is very important; a tire retreaded using a first-class casing can present an RRC lower than an equivalent low-cost new tire. On the other hand, the dynamic properties of the material added in the new tread are important, but the difference encountered between retreaded tires using different retreading materials and processes remains less than 5%. To study the influence of the aging of the materials, used tires were also tested before and after retreading. In view of the results, the aging condition of the casing seems not to have a clear effect on the RRC of the used tire. Indeed, the effect seems to be beneficial for the passenger car and detrimental for the truck samples studied. Those effects are smoothed during retreading, and the casing condition is not presented as a main factor of the RRC of the retreaded tire. It is worth noting that the study was carried out on a small sample of tires of two specific dimensions: a small passenger car tire (185/65 R15) and a European standard size for long-distance trucks (315/70 R22.5). Although the results and conclusions are very interesting, they should be taken with caution when extrapolated to other types of tires.
Área de conocimiento :
CDU: Ciencias aplicadas: Ingeniería. Tecnología
Tipo documento :
application/pdf
Derechos de acceso:
info:eu-repo/semantics/openAccess
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
DOI :
https://doi.org/10.5254/rct.19.81483
Aparece en las colecciones:
Artículos Ingeniería Mecánica y Energía



Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.