Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/32223

High-Temperature Mineral Formation after Firing Clay Materials Associated with Mined Coal in Teruel (Spain)


no-thumbnailVer/Abrir:

 High-Temperature Mineral Formation after Firing Clay Materials Associated with Mined Coal in Teruel (Spain).pdf



1,52 MB
Adobe PDF
Compartir:

Este recurso está restringido

Título :
High-Temperature Mineral Formation after Firing Clay Materials Associated with Mined Coal in Teruel (Spain)
Autor :
Jordán-Vidal, Manuel Miguel
Meseguer, Sergio
Pardo, Francisco
Montero, María Adriana
Editor :
MDPI
Departamento:
Departamentos de la UMH::Agroquímica y Medio Ambiente
Fecha de publicación:
2020
URI :
https://hdl.handle.net/11000/32223
Resumen :
The production of porcelain stoneware has experienced a considerable increase. Therefore, it was necessary to undertake an investigation that would allow knowing the mineralogical evolution that porcelain stoneware undergoes during the firing process, as well as establishing the influence of the formation of mullite and other mineral or vitreous phases and their quantification. The firing transformations of mine spoils associated with mined coal in the Utrillas-Escucha-Estercuel and Ariño-Andorra areas are studied in this paper. The mineralogical composition of the bulk mine spoils is kaolinite, illite, chlorite, and smectites (in traces), with quartz and feldspar, and minor hematite, calcite, and dolomite. The main objective is to understand the generation of high-temperature mineral phases after firing, and their quantification. The formation of mullite and other high-temperature phases are studied from samples that include variable proportions of illite. Samples with a high content of illite generate mullite at 995 C. Cristobalite was not detected as a high-temperature phase. Mullite is the most abundant mineral. The hercynite content is higher at low temperatures (995 C), and hematite content is higher at 1150 C. The vitreous phase represents about 50% of fired bodies. Despite observing a porous microstructure, the non-porous areas are well sintered.
Palabras clave/Materias:
Teruel
clay spoils
firing transformations
phase generation
vitreous phase
FTIR
XRD
Área de conocimiento :
CDU: Ciencias puras y naturales
Tipo documento :
application/pdf
Derechos de acceso:
info:eu-repo/semantics/closedAccess
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
DOI :
http://dx.doi.org/10.3390/app10093114
Aparece en las colecciones:
Artículos Agroquímica y Medio Ambiente



Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.