Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/11000/31164
Numerical sound prediction model to study tyre impact noise
Ver/Abrir: Numerical Sound .pdf
594,47 kB
Adobe PDF
Compartir:
Este recurso está restringido
Título : Numerical sound prediction model to study tyre impact noise |
Autor : Campello Vicente, Héctor Campillo Davo, Nuria Peral Orts, Ramón Fabra Rodríguez, Miguel Abellan Lopez, David ![](/jspui/image/ORCID.jpg) |
Editor : Elsevier |
Departamento: Departamentos de la UMH::Ingeniería Mecánica y Energía |
Fecha de publicación: 2023 |
URI : https://hdl.handle.net/11000/31164 |
Resumen :
Impact noise is one of the mechanisms of vibratory origin that constitutes tyre/road interaction noise.
When assessing a vehicle as a noise source, the impact sound mechanism is especially significant when
obstacles are present on the driving surface. This document aims to enhance understanding of the impact
noise phenomenon by presenting a two-step numerical model for studying the sound propagation of an
accelerated tyre impacting a flat, rigid, and reflective surface: Firstly, a dynamic analysis of the contact is
performed using the Finite Element Method. Then, the Boundary Element Method is used to perform an
acoustic analysis with the vibration of the tyre surface as the sound source. The model has been successfully
validated through a drop-test, where a tyre/rim assembly is dropped onto a ground surface. The validation
was determined by comparing the predicted Sound Pressure Level measurements to those
obtained from a circular microphone structure at various points during the drop-test.
|
Palabras clave/Materias: Tyre/road noise Impact noise FEM-BEM modelling Acoustic simulation |
Área de conocimiento : CDU: Ciencias aplicadas: Ingeniería. Tecnología: Ingeniería mecánica en general. Tecnología nuclear. Electrotecnia. Maquinaria |
Tipo documento : application/pdf |
Derechos de acceso: info:eu-repo/semantics/closedAccess Attribution-NonCommercial-NoDerivatives 4.0 Internacional |
DOI : https://doi.org/10.1016/j.apacoust.2023.109325 |
Aparece en las colecciones: Artículos Ingeniería Mecánica y Energía
|
La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.