Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/39331
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorRoca Reina, Juan Carlos-
dc.contributor.authorAguilar Valero, Francisco Javier-
dc.contributor.authorVicente Quiles, Pedro Ginés-
dc.contributor.otherDepartamentos de la UMH::Ingeniería Mecánica y Energíaes_ES
dc.date.accessioned2026-02-16T13:36:55Z-
dc.date.available2026-02-16T13:36:55Z-
dc.date.created2025-12-
dc.identifier.citationThermal Science and Engineering Progress (TSEP), Volume 68, December 2025, 104287es_ES
dc.identifier.issn2451-9049-
dc.identifier.urihttps://hdl.handle.net/11000/39331-
dc.description.abstractDecarbonising the built environment is crucial for the European Union to achieve its 2030 and 2050 climate targets, as outlined in the European Green Deal. Heating and cooling account for nearly 80 % of the total final energy consumption in buildings. Typically, the decarbonisation of a building’s heating and cooling facility involves replacing the fuel-based heating system with an alternative energy source. However, these solutions do not apply to all buildings in the EU. There are areas of the EU in which heating and cooling can be 100 % electrified, without any connection to a district heating or cooling grid, nor to other energy carrier grid like gas. These scenarios are seen, for example, in some service buildings located in Mediterranean areas of the EU. This paper shows a practical pathway for the decarbonisation of an office building by improving its energy facilities. The building is located in a Mediterranean area, and it is 100 % electrified. The heating and cooling demand of the building, along with its entire electricity consumption, are measured as a starting point. This data enables the calibration of an energy model of the building carried out in EnergyPlus. The energy efficiency measures proposed to decarbonise the building are analysed using the calibrated energy model of the building, enabling more realistic calculations about the impact of these measures. Some results indicate that the use of variable speed pumps can reduce the electricity consumption for pumping water by almost 8 %, that a dimming controller of the lighting facility could reduce the lighting consumption by 25 % and that a photovoltaic facility, which occupies all available roof space, could produce 20 % of the building’s total annual electricity consumption. The novelty of this work is to create a pathway to decarbonise 100 % electrified buildings located in Mediterranean areas and to understand their decarbonisation possibilities, thereby providing practical insights to help the decision-making process to reduce the carbon footprint of this type of buildings.es_ES
dc.formatapplication/pdfes_ES
dc.format.extent15es_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectservice buildingses_ES
dc.subjectdecarbonisationes_ES
dc.subjectmediterranean areases_ES
dc.subjectheatinges_ES
dc.subjectcoolinges_ES
dc.subjectexperimental dataes_ES
dc.subject.otherCDU::6 - Ciencias aplicadas::62 - Ingeniería. Tecnología::621 - Ingeniería mecánica en general. Tecnología nuclear. Electrotecnia. Maquinariaes_ES
dc.titleDecarbonisation pathways of 100 % electrified building facilities: An experimental and simulation case study in a Mediterranean areaes_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherversionhttps://doi.org/10.1016/j.tsep.2025.104287es_ES
Aparece en las colecciones:
Artículos Ingeniería Mecánica y Energía


thumbnail_pdf
Ver/Abrir:
 9_Decarbonisation pathways of 100 % electrified building facilities_TSEP_2025.pdf

7,77 MB
Adobe PDF
Compartir:


Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.