Título : Estimation of Human Arm Joints Using Two Wireless Sensors in Robotic Rehabilitation Tasks |
Autor : Badesa, Francisco Javier García Aracil, Nicolás Ezquerro, Santiago Catalán, José M. Díez, Jorge A. Lledó, Luis D. Bertomeu Motos, Arturo |
Editor : MDPI |
Departamento: Departamentos de la UMH::Ingeniería de Sistemas y Automática |
Fecha de publicación: 2015 |
URI : https://hdl.handle.net/11000/31244 |
Resumen :
This paper presents a novel kinematic reconstruction of the human arm chain with five
degrees of freedom and the estimation of the shoulder location during rehabilitation therapy assisted
by end-effector robotic devices. This algorithm is based on the pseudoinverse of the Jacobian
through the acceleration of the upper arm, measured using an accelerometer, and the orientation
of the shoulder, estimated with a magnetic angular rate and gravity (MARG) device. The results
show a high accuracy in terms of arm joints and shoulder movement with respect to the real arm
measured through an optoelectronic system. Furthermore, the range of motion (ROM) of 50 healthy
subjects is studied from two different trials, one trying to avoid shoulder movements and the
second one forcing them. Moreover, the shoulder movement in the second trial is also estimated
accurately. Besides the fact that the posture of the patient can be corrected during the exercise, the
therapist could use the presented algorithm as an objective assessment tool. In conclusion, the joints’
estimation enables a better adjustment of the therapy, taking into account the needs of the patient,
and consequently, the arm motion improves faster.
|
Palabras clave/Materias: kinematic reconstruction neuro-rehabilitation end-effector robots upper limbs MARG |
Área de conocimiento : CDU: Generalidades.: Ciencia y tecnología de los ordenadores. Informática. |
Tipo de documento : info:eu-repo/semantics/article |
Derechos de acceso: info:eu-repo/semantics/openAccess Attribution-NonCommercial-NoDerivatives 4.0 Internacional |
DOI : https://doi.org/10.3390/s151229818 |
Aparece en las colecciones: Artículos Ingeniería de Sistemas y Automática
|