Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/11000/30656
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorClement Bellido, Juan-
dc.contributor.authorHervás Peralta, Javier-
dc.contributor.authorMadrigal Madrigal, Javier-
dc.contributor.authorMaestre, Haroldo-
dc.contributor.authorTorregrosa-Penalva, Germán-
dc.contributor.authorFernandez-Pousa, Carlos-
dc.contributor.authorSales Maicas, Salvador-
dc.contributor.otherDepartamentos de la UMH::Ingeniería de Comunicacioneses_ES
dc.date.accessioned2024-01-26T09:01:29Z-
dc.date.available2024-01-26T09:01:29Z-
dc.date.created2018-03-22-
dc.identifier.citationJOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 36, NO. 19, P. 4393-4400, OCTOBER 1, 2018es_ES
dc.identifier.issn1558-2213-
dc.identifier.urihttps://hdl.handle.net/11000/30656-
dc.description.abstractWe present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array’s radio frequency (RF) response at a sparse number of frequencies. FBG reflectivities are determined by use of the inverse discrete Fourier transform (IDFT) of the sparse RF response, in a dynamic range limited by crosstalk induced by FBG positioning errors. The first implementation employs the complete, vector RF response at a number of frequencies equal to the number N of FBGs in the array. In the second, the introduction of a reference reflector allows for an interrogation using the power (phaseless) RF response in 4N − 1 frequencies. Demodulation based on IDFT leads to total interrogation times determined by the network analyzer scan time,which can be as lowas 10 μs per FBG. Depending on the interrogation technique, electrical bandwidth requirements are 1–2 GHz in our array with 10-cm separation. We implemented both techniques in a N = 10 array, inducing decays in reflectivity by 10 dB in one or several FBGs. Unambiguous detection of FBG decays was obtained in both interrogation methods. Additional tests performed on the measured reflectivities also show that measurement linearity is preserved in the 10-dB decay range. As discrete I-OFDR systems, the proposed techniques show the possibility to reach compromises between interrogation time and dynamic range or accuracy in reflectivity measurements, using the number of interrogation frequencies and the sensor topology.es_ES
dc.formatapplication/pdfes_ES
dc.format.extent8es_ES
dc.language.isoenges_ES
dc.publisherInstitute of Electrical and Electronics Engineers / Optica Publishing Groupes_ES
dc.rightsinfo:eu-repo/semantics/closedAccesses_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectFiber Bragg gratingses_ES
dc.subjectincoherent OFDRes_ES
dc.subjectmicrowave photonicses_ES
dc.subjectoptical fiber sensorses_ES
dc.subjectsensor interrogationes_ES
dc.subject.classificationTeoría de la Señal y Comunicacioneses_ES
dc.subject.otherCDU::6 - Ciencias aplicadas::62 - Ingeniería. Tecnologíaes_ES
dc.titleFast Incoherent OFDR Interrogation of FBG Arrays Using Sparse Radio Frequency Responseses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherversionhttps://doi.org/10.1109/JLT.2018.2821199es_ES
Aparece en las colecciones:
Artículos Ingeniería Comunicaciones


no-thumbnailVer/Abrir:

 6. 2018_JOURNALLIGHTWAVETEC_Q1.pdf



859,72 kB
Adobe PDF
Compartir:


Creative Commons La licencia se describe como: Atribución-NonComercial-NoDerivada 4.0 Internacional.