Please use this identifier to cite or link to this item: https://hdl.handle.net/11000/30704
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRodrigues, Carolina-
dc.contributor.authorDal Magro Follmann, Hioná V.-
dc.contributor.authorNúñez-Gómez, Dámaris-
dc.contributor.authorNagel-Hassemer, Maria Eliza-
dc.contributor.authorLapolli, Flávio R.-
dc.contributor.authorLobo-Recio, Maria Ángeles-
dc.contributor.otherDepartamentos de la UMH::Producción Vegetal y Microbiologíaes_ES
dc.date.accessioned2024-01-26T10:19:32Z-
dc.date.available2024-01-26T10:19:32Z-
dc.date.created2020-07-
dc.identifier.citationEnvironmental Science and Pollution Research 27 (2020)es_ES
dc.identifier.issn0944-1344-
dc.identifier.issn1614-7499-
dc.identifier.urihttps://hdl.handle.net/11000/30704-
dc.description.abstractThis work aimed to remove sulfate and acidity from mine-impacted water (MIW) via electrocoagulation (EC), a technique which stands as an advanced alternative to chemical coagulation in pollutant removal from wastewaters. The multiple electrochemical reactions occurring in the aluminum anode and the stainless steel cathode surfaces can form unstable flakes of metal hydroxysulfate complexes, causing coagulation, flocculation, and floatation; or, adsorption of sulfate on sorbents originated from the electrochemical process can occur, depending on pH value. Batch experiments in the continuous mode of exposition using different current densities (35, 50, and 65 A m−2) were tested, and a statistical difference between their sulfate removals was detected. Furthermore, the intermittent mode of exposure was also tested by performing a 22-factorial design to verify the combination with different current densities, concluding that better efficiencies of sulfate removal were obtained in the continuous mode of exposition, even with lower current densities. After 5 h of electrocoagulation, sulfate could be removed from MIW with a mean efficiency of 70.95% (in continuous mode of exposition and 65 A m−2 current density), and this sulfate removal follows probable third-order decay kinetics in accordance with the quick drop in sulfate concentration until 3 h of exposure time, remaining virtually constant at longer times.es_ES
dc.formatapplication/pdfes_ES
dc.format.extent12es_ES
dc.language.isoenges_ES
dc.publisherSpringeres_ES
dc.rightsinfo:eu-repo/semantics/closedAccesses_ES
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectAcid mine drainage (AMD)es_ES
dc.subjectMine-impacted water (MIW)es_ES
dc.subjectElectrocoagulationes_ES
dc.subjectSulfate removales_ES
dc.subjectDecay kineticses_ES
dc.subjectFactorial designes_ES
dc.titleSulfate removal from mine-impacted water by electrocoagulation: statistical study, factorial design, and kineticses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherversionhttps://doi.org/10.1007/s11356-020-09758-1es_ES
Appears in Collections:
Artículos Producción vegetal y microbiología


no-thumbnailView/Open:

 Sulfate removal.pdf



1,83 MB
Adobe PDF
Share:


Creative Commons ???jsp.display-item.text9???